Brownie's Tankfill™ Marine Basic™ Systems
Light Duty
(Small boat owners, diving individuals or couples)

Designed and built specifically to withstand the marine environment - all components and hardware are impervious to water/weather spray. Many of the same quality components of our Yacht Pro™ series, but without the automation features.

Please note: Accumulating condensate must be manually drained from the system every 15 minutes (minimum) and at the end of the filling process. The operator must shut off power to the system when the target fill pressure is reached in the tanks.

Single tank fill assembly consisting of Kevlar reinforced hose with non-corroding stainless steel ends, stainless pressure gauge, flow control valve, tank fitting with bleed valve.

* Based on recharging a single 80 cu ft. tank from 500 to 3000 PSIG.
** Air Processing Capacity based on standard inlet conditions, 68 degrees F at 1 ATA, and relative humidity of 36%. Results will vary due to condition variations.

Note: Marine Basic™ 25 and 35 are designed for filling SCUBA or SCBA bottles. It is neither designed nor intended for filling cascade storage systems of any kind.

Brownie’s Marine Basic™ compressors are fully-marinized tank filling systems designed for light duty or occasional use on board a vessel.  If your diving needs may exceed this or you are looking for a more advanced system, a Yacht Pro™ compressor might be better suited for you.  The Yacht Pro™ series compressors offer a multitude of features, including full automation, Brownie’s Digital Frequency Drive and a 4-way tank filling manifold.  Click here for more information on Brownie’s Yacht Pro™ compressors.